Labwork Front L & R Engine & Trans Mount Set 3PCS for 2012-2018 Audi A6 2.0L

Fitment：

For 2012-2018 Audi A6 2.0L FWD

Description：

-Follow the steps below for some handy tips for replacing engine mounts. 

Step 1: Check for clearance against the firewall before attempting to raise the engine. Tearing radiator hoses, crimping AC lines or cracking distributor caps should be avoided.

Step 2: Secure the engine on a jack with various blocks of wood. Never jack an engine directly by the oil pan. The pan will bend and rupture.

Step 3: Loosen the engine from the mount bolts. Sometimes a long extension and universal joint is the way to go.

Step 4: Next, crawl under the vehicle and loosen the mount-to-frame bolts.

Step 5: Jack-up the engine a little at a time and remove the motor mount.

Step 6: Compare the old and new motor mounts. Transfer any heat or drip shields to the new mount.

Step 7: Thread in the mount-to-frame bolts before lowering the engine. This will simplify mount alignment.

Step 8: Lower the engine and fully tighten all bolts.

Step 9: Front-wheel-drive vehicles often have third "dog-bone" motor mounts.

-OE Number:A4923, 9988, 10046, 9928, EM-7340, 8K0399151CD, 8K0399151DB, 8K0399151DK

Package Include：

1x Front Left Motor Mount (with Wire/ Sensor)Part Number# 9988, EM-7340

1x Front Right Motor Mount (with Wire/ Sensor)Part Number# 10046

1x Rear Transmission Mount Part Number# 9928, A4923

W/o Product Instruction

Notes：

-If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase.

-Please Allow 1-3CM Differs Due To Manual Measurement.
-Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding.