Labwork For Ford Escape 2013 2014 2015 2016 Air Dam Deflector Front Lower

About Labwork：

Labwork is an Auto Parts One-Stop Solution brand of more than 10 years, which specializes in providing global customers with top-notched quality automotive parts & accessories . If you need any auto parts, its enough to come to Labwork.

Features：

-OE NO.: CJ5Z17D957AA
-INTERCHANGE PART NUMBERS: CJ5Z17D957AA, FO1095247C, DV45-17F775AB59QR, CJ5Z-17D957-AA, Bumper Assy, Bumper Assembly, Valance
-OTHER PART NUMBERS: FO1095247C
-QUANTITY PER PACKAGE: 1
-This part may also be known as: Air Dam Deflector

Fitment：

For 2013-2014 For Ford Escape S Plus Sport Utility 4-Door
For 2013-2016 For Ford Escape S Sport Utility 4-Door
For 2013-2014 For Ford Escape SE Plus Sport Utility 4-Door
For 2013-2016 For Ford Escape SE Sport Utility 4-Door
For 2013-2013 For Ford Escape SEL Sport Utility 4-Door
For 2013-2016 For Ford Escape Titanium Sport Utility 4-Door
For 2015-2016 For Ford Escape Trend Sport Utility 4-Door

Package Includes：

1*Fuel Pump

Note:
In order to deliver the bumper to your hand as soon as possible, the bumper will fold to varying degrees, but it will not affect its performance. If you agree, please understand
Brand New in the Box - Fit and Quality Guaranteed!

Reminder:

Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.