Always the correct part
We know our products
Free Shipping to the USA
Free shipping on all orders
labwork AIR FUEL RATIO SENSOR 8946741030 For 2000-04 Toyota Avalon Camry Sienna
●  Over $79, $5 OFF, Code: 2022NEW5
●  Over $169, $15 OFF, Code: 2022NEW15
●  Over $229, $25 OFF, Code: 2022NEW25
●  Over $409, $50 OFF, Code: 2022NEW50
Please check fitment notes...
Please check fitment notes & description for accurate information.
Oxygen Sensor's Location:
How do I know the O2 sensor is good or not?
Check engine light on
A reduction in fuel economy.
Your catalytic converter fails unexpectedly
Exhaust emissions reach undesirable levels.
How to install the oxygen sensor?
Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.
Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.
Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.
Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)
Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.
Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.
Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.
Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.
Must Know Before Buying:
The following information is for instructional and guidance reference only. We try and make them as accurate as we can.
If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below.
If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.
Items that have been installed, altered or contaminated are non-returnable.
1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.
The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
RETURNIf you are not completely satisfied with your purchase, we will be happy to accept a return for a refund or exchange on products in new/unused condition within 30 days of delivery. All authorized returns must be unused and in their original condition, including all items and components that were included in the original package. Items being returned must not have been disassembled, mounted, modified, or damaged due to incorrect installation or user error. LABWORKAUTO.com will not be held responsible for installation or labor expenses, towing expenses, additional repair expenses, or rental car expenses caused by the use of wrong or defective parts during installation.
We provide a limited warranty of 90 days for defective products from the date the product is received by the original purchaser or installer, unless otherwise specified at the time of purchase.
For each of our product warranties offered above, the following provisions apply:
The warranty is limited only to the original purchaser and is non-transferable.
Under NO circumstances will our liability exceed the amount of the original sale.
Each warranty does not cover any labor costs or incidental, indirect, special or consequential damages such as, but not limited to, physical injuries or property damage, loss of time, loss of use of the vehicle, inconvenience, air freight charges, rental vehicle charges, towing charges or accommodations resulting from a defect in or failure of the part.
A prepaid shipping label will be issued for all returns due to warranty claim.
The warranty does not cover lost or stolen packages. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.