labwork A/C Compressor Clutch Repair Kit [Round Plug] for 2001-2008 Toyota Camry Highlander Solara 2.4L

Key Features

• Complete Overhaul Assembly: Features all three vital components required to fully restore your air conditioning system: the electromagnetic coil magnet, the pulley assembly with pre-installed sealed bearing, and the splined outer clutch drive plate.

• Positive Magnetic Engagement: Engineered with a heavy-duty, high-output electromagnet that tightly clamps the drive plate against the spinning pulley when current is applied. This locks the compressor input shaft into immediate rotation, restoring freezing air flow to your cabin.

• Reduced Engine Drag: When the air conditioning is switched off, the clutch completely disengages, allowing the drive pulley to freewheel effortlessly on its heavy-duty sealed bearing assembly, preventing parasitic engine drag and saving fuel.

• Premium Noise Elimination: Replaces old, squealing, or binding pulley bearings and slipping clutch plates to eliminate grinding noises under the hood instantly.

⚠️ CRUCIAL CONNECTOR & BUYER NOTICE

To prevent ordering errors and high return shipping costs, please verify your original compressor clutch wiring connector style before purchasing:

• ROUND PLUG CONNECTOR ONLY: This specific repair kit is equipped with a Round-Style Electrical Wiring Plug.

• Visual Check Required: Certain sub-models within the same year range may utilize a square or rectangular wiring plug depending on factory assembly location. Please physically inspect your vehicle's original compressor coil plug to guarantee it matches a round configuration before ordering.

Fitment & Compatibility Guide

Specifically engineered as a direct replacement component for the following 2.4L 4-Cylinder platforms equipped with a round connector layout:

Package Includes

• 1 × Electromagnetic Coil Magnet (With Round Wiring Plug)

• 1 × A/C Compressor Pulley (With Pre-Installed Sealed Bearing)

• 1 × Front Clutch Drive Plate (Splined Core)

  (Note: Shims, retaining snap rings, and installation instructions are NOT included).

Important Installation Notes

• Set Proper Air Gap Clearance: During installation of the front drive plate, utilize the appropriate thickness of spacer shims to set the factory-specified air gap between the plate and pulley face. Too wide of a gap will cause the clutch to slip, while too narrow of a gap will cause constant rubbing.

• Clean the Pulley Face: Ensure both mating surfaces of the new pulley and front clutch plate are completely free of packing grease or oil residue before operation to ensure strong friction lockup.

• Professional Installation Recommended: Rebuilding an A/C compressor clutch requires specialized pullers and snap-ring pliers. Professional servicing by a certified automotive technician is highly recommended.