8/10/12 Inch 2 Jaw Gear Puller Adjustable Bearing Puller Gears Removal Tool

8 Inch 2-Jaw Gear Puller Adjustable

Specification:

• Condition:New
• Material: Chrome Vanadium Steel
• Surface Treatment: Chrome plating
• Number of Claws: Two-claw
• Size: 8inch
• Screw length: 170mm
• Screw diameter: 13mm
• Cross arm length: 195mm
• Total claw arm length: 135mm
• Maximum depth distance of reach: 98mm
• Distance between the inside of the arms(adjustable): 25-185mm

10 Inch 2-Jaw Gear Puller Adjustable

Specification:

• Condition:New
• Material: Chrome Vanadium Steel
• Surface Treatment: Chrome plating
• Number of Claws: Two-claw
• Size: 10inch
• Screw length: 245mm/ 9.65"
• Screw diameter: 19.5mm/0.7"
• Cross arm length: 273mm/10.75"
• Total claw arm length: 210mm/8.27"
• Maximum depth distance of reach: 146mm/5.75"
• Distance between the inside of the arms(adjustable): 78-266mm/3.07-10.47"
• Product Weight: 2308 G / 81.41 Ounces
• Product Dimensions (L*W*H) : 273*245*32 MM / 10.75*9.65*1.26 Inches

12 Inch 2-Jaw Gear Puller Adjustable

Specification:

• Condition:New
• Color:As shown in the picture
• Material: Chrome Vanadium Steel
• Surface Treatment: Chrome plating
• Number of Claws: Two-claw
• Size: 12inch
• Cross Arm Length: 305mm / 12"
• Total Jaw Length: 235mm / 9.3"
• Maximum Bearing Diameter: 248mm / 9.8"
• Thread Rod Length: 248mm / 9.8"
• Thread Diameter: 19.4mm / 0.76"

Features:

• Thicker beam design, strong and serviceable, stainless does not rot.
• Adjustable clamping depth.
• Ultra-thin Claw, ultra high strength, not easy to pull bad.
• The reasonable design of the claws makes them not fall off when the force is applied.
• The reasonable design of the pulling claw makes it not easy to fall off when applying force.
• The tip of the ejector pin is a heat treated rotating head that does not injure other parts and is serviceable and labor-saving.
• The claw puller is forged from chrome vanadium steel, serviceable, rust-proof and non-slip.
• With elastic metal resistance, easy installation.

Note:

• 1.Adjust the center distance before removing the bearing.
• 2.Hold the positioning wrench with the left hand and twist the screw with the right hand.
• 3.Please operate slowly and do not use too much force.

Fitment :

For Automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc.

Package includes：

Two-claw Puller

W/O Product Instructio

Notes: 

Please check the pictures carefully before buying to determine whether these products are what you need.

Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time before opening return or case.

Please check size picture before purchase!