1200 Count 1-1/4 Inch x 0.090 Ring Shank 304 Stainless Steel 15-Degree Nails

Structural Features:

15-Degree Ring Shank
Recommended Nail Gun Model: CN45

Size:

Length: 1-1/4 inch
Diameter: 0.090 inch
Cap Diameter: 5.2-5.3 mm

Application:

Suitable for wood applications, including wooden houses, wooden pallets, wooden cases and plywood.

Wire collated nails are used for rough nailing of lathing and sheathing materials.

Important Note:

Not for cement board applications.

Do NOT use for cement board.

Please confirm your application before purchase.

Usage Steps:

Before nailing, cut off the air and clear the compartment.

Place the circular rib nail, pointed outside the head, and lock the compartment cover.

Adjust the depth and air pressure, test it for security before use.

Nail Loading Steps:

1. Check specs - Verify nails match gun requirements.

2. Prep gun - Disconnect air, release pressure, clear old nails.

3. Load nails - Open cover, insert head-down / tip-out, align in slots.

Key: Match, Depressurize, Correct insert.

Arrange Nails:

Neatly place in guide slots, close the compartment cover and confirm locking.

Connect the air source and test it on waste wooden board.

Check if it is smooth, and adjust the air pressure or depth if necessary.

Safety Regulations:

Wear goggles to ensure that the gun head is tightly attached to the work surface.

Do not dry-fire the tool to avoid damaging it.

Be sure to ensure safety settings before operation.

Package Includes:

1200 x 1-1/4 Inch x 0.090 Inch Ring Shank 304 Stainless Steel 15-Degree Nails