Sale
Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8-Lab Work Auto Parts-
Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8-Lab Work Auto Parts-
Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8-Lab Work Auto Parts-
Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8-Lab Work Auto Parts-
Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8-Lab Work Auto Parts-
Click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • 90-day warranty

    Worry-free returns

  • Free Shipping to the USA

    Free shipping on all orders

Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8

2 Sale -Up to 70% off, buy more save more.
●  Over $79, $5 OFF, Code: 2022NEW5
●  Over $169, $15 OFF, Code: 2022NEW15
●  Over $229, $25 OFF, Code: 2022NEW25
●  Over $409, $50 OFF, Code: 2022NEW50
8
Out of stock Many in stock
$49.90 $49.51

7L3Z9D475B EGR Valve CX2095 For 07-10 Ford F-150 07-14 Ford E-150 E250 V8 4.6L

1 YEAR WARRANTY
Specification:
Condition:...

$49.51

Labwork EGR Valve 7L3E9Y456BA for 2007-14 Ford F150 E150 E250 Truck 4.6L V8

7L3Z9D475B EGR Valve CX2095 For 07-10 Ford F-150 07-14 Ford E-150 E250 V8 4.6L

1 YEAR WARRANTY
Specification:
Condition: Brand New
Interchange Part Number:EGV1136,7L3Z9D475B,CX2095,EGR4510,4F2060,7L3E9Y456BA

Make Model Year Range
Ford E150 4.6L 2007 - 2014
Ford E250 4.6L 2007 - 2014
Ford F150 4.6L 2007 - 2010


In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free.

We only warranty cost of item parts. Any installation or other fees are non-refundable.

Please contact us before modifying the part so that we have the opportunity to correct the situation.

The EGR valve is also called the exhaust gas recirculation valve. It is a mechatronic product installed on a diesel engine to control the exhaust gas recirculation volume of the intake system. It is a very important and key component of the exhaust gas recirculation device.
Its function is to control the amount of exhaust gas entering the intake manifold so that a certain amount of exhaust gas flows into the intake manifold for recirculation.

The EGR valve is usually located on the right side of the intake manifold, close to the throttle body, connected to the intake manifold and exhaust manifold, and the degree of opening of the valve is controlled by the vacuum pipe to determine the amount of exhaust gas passed into the intake manifold.
It reduces the temperature of the combustion chamber by directing the exhaust gas discharged from the combustion of the engine to the intake manifold to participate in the combustion, thereby improving the working efficiency of the engine, improving the combustion environment, and reducing the burden on the engine, effectively reducing the emission of carbon monoxide compounds, reducing knocking, and extending each Component service life.

When the engine is running under load, the EGR valve opens, allowing a small amount of exhaust gas to enter the intake manifold and into the combustion chamber together with the combustible mixture.
When idling, the EGR valve is closed, and almost no exhaust gas is recirculated to the engine.


1. EGR solenoid valve

Function: ECU controls the EGR solenoid valve through the duty cycle signal to reduce the back pressure of the EGR valve, thereby opening the EGR valve.
Structure: The EGR solenoid valve has three air ports. When the EGR solenoid valve is not energized, the spring presses the valve body upward, and the atmospheric valve port is closed.
At this time, the EGR solenoid valve makes the intake manifold communicate with the vacuum chamber of the EGR valve;
When the EGR solenoid valve coil is energized, the electromagnetic force generated causes the valve body to move down. The lower end of the valve body closes the vacuum passage to the intake manifold, and the upper end of the atmospheric valve port opens, so that the vacuum chamber of the EGR valve is connected to Great harmony.


2. EGR valve
Function: The valve that controls the exhaust gas entering the intake pipe.
Structure: One side (lower part) of the EGR valve diaphragm is open to the atmosphere, and the other side with a spring is a vacuum chamber whose vacuum is controlled by an EGR solenoid valve.
Increasing the vacuum degree of the vacuum chamber causes the diaphragm to arch up against the spring force, the valve opening degree increases, and the exhaust gas recirculation flow rate also increases.
When the upper part loses vacuum, the diaphragm arches downward under the action of the spring force to close the valve and block the recirculation of exhaust gas.

What is the phenomenon of EGR valve broken

If the EGR valve is broken, if the exhaust gas recirculation valve is not closed tightly, part of the exhaust gas will enter the engine intake pipe through the exhaust gas recirculation valve when the engine is idling.
When the engine is idling, the amount of mixed gas is very small, and the exhaust gas entering the intake pipe will dilute the concentration of the mixed gas, which will have a significant impact on the idling operation of the engine, making the engine idling extremely unstable and even stalling.

1. The EGR is closed for a long time. At this time, it will affect the emission of the vehicle, which means that the emission may not meet the standard. If you go to the annual inspection, it may not pass.

2. When the EGR is long open, the vehicle will emit black smoke, accelerate weakly, and increase fuel consumption. At this time, the EGR valve must be replaced or cleaned.

1. Inspection of EGR valve

When a vacuum of 15kPa is applied to the EGR valve, the EGR valve should be able to be opened; when no vacuum is applied, the EGR valve should be able to be completely closed.


2. Inspection of EGR solenoid valve

Measure the resistance value, it should be 33~39Ω. When the power is off, the air blowing in from the side joint of the air intake pipe should be unblocked, and the air blowing in from the air filter should be blocked. When energized, it is just the opposite of the above

Read More
Read Less

To ensure a faster and secure delivery, we choose FedEx, USPS, UPS, DHL Ground/Air shipping service. Available shipping methods are vary from different type of products and delivery destination. The majority in stock products and orders are going to be shipped the same day or within 1 business day. After which its delivery details can be tracked with the tracking number we email you. For custom or made to order products’ shipping time varies as they may have to be manufactured, painted, embroidered or assembled.

For more information, please check the following tips:

  • Oversized products must ship by truck freight or LTL which is different from other ground shipping methods. Please noted that oversized products are required inspections and a signature service. Freight Shipping Information
  • We offer free shipping service for 47 sates in domestics. HI, PR, AK, Guam, Virgin Islands, APOs are excluded from free shipping areas. You will be charged extra shipping fee for orders’ destinations that are not 47 free shipping states.
  • "Free Shipping" applies only to orders shipped within the continental United States.

DISCLAIMER

In order to provide all our valued customers with the most up to date and accurate compatibility information, LABWORKAUTO is continuously implementing real-time updates to our line store. Due to the immediate nature of these updates, the correction of any errors or omissions might happen at any time without prior notice. This information may include but not limited to pricing, availability, suggested use, fitment, compatibility and warranties. LABWORKAUTO is not responsible for any additional labor cost, charge, loss or damage incurred as a result of correct or incorrect information, reference or products purchase from LABWORKAUTO. While we are working to avoid any errors or omissions that may appear on LABWORKAUTO website, we reserve the rights to cancel any undeliverable orders based on inaccurate information.

TRACK YOU ORDER

If you want to track the logistics status of your order, please click here

RETURN

If you are not completely satisfied with your purchase, we will be happy to accept a return for a refund or exchange on products in new/unused condition within 30 days of delivery. All authorized returns must be unused and in their original condition, including all items and components that were included in the original package. Items being returned must not have been disassembled, mounted, modified, or damaged due to incorrect installation or user error. LABWORKAUTO.com will not be held responsible for installation or labor expenses, towing expenses, additional repair expenses, or rental car expenses caused by the use of wrong or defective parts during installation.

We provide a limited warranty of 90 days for defective products from the date the product is received by the original purchaser or installer, unless otherwise specified at the time of purchase.

For each of our product warranties offered above, the following provisions apply:

The warranty is limited only to the original purchaser and is non-transferable.

Under NO circumstances will our liability exceed the amount of the original sale.

Each warranty does not cover any labor costs or incidental, indirect, special or consequential damages such as, but not limited to, physical injuries or property damage, loss of time, loss of use of the vehicle, inconvenience, air freight charges, rental vehicle charges, towing charges or accommodations resulting from a defect in or failure of the part.

A prepaid shipping label will be issued for all returns due to warranty claim.

The warranty does not cover lost or stolen packages. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.

Your cart

×